All major refrigerator brands · Las Vegas Valley · Mon–Fri 8 AM–7 PM · Sat–Sun 8 AM–4 PM (702) 766-8929

LG refrigerator error codes explained

LG refrigerators show "Er" followed by two letters, alternating in the temperature display. The letters identify the part — FF is the freezer fan, CF the condenser fan, dH the defrost heater, CO communication. Most LG codes are fan, sensor or defrost faults, not compressor failures.

Updated October 4, 2026 · Vegas Fridge Repair service team

Common LG codes

CodeMeaningWhat usually causes it
Er FFFreezer fan errorIce blocking the freezer evaporator fan, or a failed fan motor
Er CFCondenser fan errorFailed condenser fan, or a fan jammed by debris — urgent in Las Vegas heat
Er IFIce maker fan errorIce compartment fan blocked by frost or failed
Er ISIce maker sensor errorFailed ice maker temperature sensor
Er dHDefrost heater errorDefrost cycle did not reach temperature — failed heater, defrost sensor or wiring
Er rSRefrigerator sensor errorFresh-food temperature sensor open or shorted
Er FSFreezer sensor errorFreezer temperature sensor open or shorted
Er dSDefrost sensor errorDefrost sensor open or shorted
Er COCommunication errorMain board and display board are not communicating — harness, door hinge wiring or a board

What to do when you see a code

  1. Write down the code. The display alternates between "Er" and the code letters.
  2. Power-cycle once. Unplug for five minutes or switch off the breaker. If the code returns, the fault is real.
  3. For Er FF or Er IF with noise: ice on a fan blade is the usual cause. A manual defrost restores operation for a while; the defrost failure behind it still needs repair.
  4. For Er CF: check that the condenser area at the bottom rear is not clogged and that nothing is blocking the fan. Do not keep running the refrigerator for days with a failed condenser fan — the compressor overheats.

LG cooling problems without a code

LG's linear and inverter linear compressors are known for failures that often show up without an error code: the refrigerator simply cools less and less. If your LG is warm with no code on the display, read about LG compressor problems and warranty coverage before paying for a compressor.

Frequently asked questions

How do I reset an LG refrigerator error code?

Unplug the refrigerator for about five minutes and plug it back in. If the code reappears, the part named by the code needs testing.

What does Er dH mean on an LG refrigerator?

The automatic defrost cycle ran, but the evaporator did not warm up as expected. The defrost heater, the defrost sensor or the wiring between them has failed. Left alone, ice will keep building until the refrigerator stops cooling. See defrost system repair.

Can I use my LG refrigerator with an Er CF code?

Only briefly. Without the condenser fan the compressor runs hot, which can shorten its life. Schedule a repair soon.

Told it can't be fixed? Call us before you replace it.

We repair refrigerators that other companies — even factory-authorized service — call "not repairable." Compressor and refrigerant leak specialists. EPA 608 certified, licensed and insured. $75 service call.

Call now Book